SharePoint Integration

Re: SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error:

reema.pereira — Tue, 22 May 2012 16:38:00 GMT

Hi Could somebody please reply to he and help me out?

I am really in need of some advice here.

Thanks much & very much appreciate the efforts - Reema

Re: SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error:

reema.pereira — Fri, 18 May 2012 22:23:22 GMT

Hi Jim,

I did try out your suggestion: upgraded to SP1 installed latest CU Dec 2011, re-ran SP Configuration wizard, performed iisreset and restarted server but it still gives me the same error about the CLSID.

I even re-wrote my solution, so as to have infopath invoke a webservice and pass the parameters to it, whereby the webservice based on a .NET 3.5 framework will then take those parameters and execute the start workflow method, however this also did not work for me.

Any ideas / suggestions for a more effective and efficient alternative way of programming this?

I still want to be able to use InfoPath for submitting the data but am open to other methods of accessing that data in my SPD workflow and executing it.

Thanks much Jim - Reema

P.S.: I would also appreciate it if anyone can reply to me too.. Thanks

Re: SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error:

reema.pereira — Mon, 07 May 2012 16:53:17 GMT

Hi Jim,

Thanks much for letting me know. I will try out your suggest and shall see what it does.

Thanks much for helping - Reema

Re: SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error:

reema.pereira — Mon, 07 May 2012 16:47:29 GMT

Hi Hilary,

Thanks much for responding. Yes, I have tried on the SharePoint Configuration, Administration and programming forums but I will also try on SharePoint Stack Exchange.
Thanks much for the suggestion

Best Regards,
Reema

Re: SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error:

Jim Cantwell — Fri, 04 May 2012 23:37:11 GMT

This guid is for the SPRequest class in SharePoint (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI\OWSSVR.DLL)

Based on your having the RTM of SharePoint installed, I suggest first updating to a more recent service pack. And make sure to run the SharePoint configuration wizard, which may repair any registry issues.

Re: SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error:

Hilary Stoupa — Fri, 04 May 2012 22:49:45 GMT

I'm sorry you've not had any responses - your situation is extremely specific, and it could just be no one in the community has run into it before. Have you tried in any SharePoint specific forums? Maybe the SharePoint StackExchange?

Re: SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error:

reema.pereira — Fri, 04 May 2012 22:45:01 GMT

Help Please!!

Re: SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error:

reema.pereira — Fri, 04 May 2012 16:46:01 GMT

Just a quick note, this was working when it was InfoPath 2007 form with SharePoint 2007. All I want to do now, is to invoke / Start the 2010 workflow from SharePoint 2010 using this InfoPath 2007 form which was code behind in C# written in VS 2008 as a new InfoPath 2007 Project.

Thanks - Reema

SharePoint 2010 with InfoPath 2007 Forms Issue: Getting "System has failed to start the workflow. Exception: Retrieving the COM class factory for component with CLSID {BDEADF26-C265-11D0-BCED-00A0C90AB50F}" failed due to the following error: 8004

reema.pereira — Thu, 03 May 2012 22:21:41 GMT

Hi,

From what I see, the error indicates that a COM component isn't registered.
I went to the component services, however I could not find this COM Component listed here at all.

My Server Details are as follows:
-----------------------------------
- Windows Server 2008 R2 x64
- SharePoint Server 2010 - 14.0.4763.1000
- InfoPath 2007 from MS Office Professional Plus 2007 version 12.0.6215.1000
- Visual Studio 2008 versin 9.0.21022.8 RTM with Microsoft.NET Framework version 3.5 SP1
- IIS version 7.5.7600.16385

.NET Frameworks installed on this Server are:
-------------------------------------------------------------------

C:\windows\microsoft.NET\Framework - V2.0, 3.0, 3.5, 4.0
C:\windows\microsoft.NET\Framework64 - V2.0, 3.0, 3.5, 4.0

My InfoPath solution is a Visual Studio 2008 InfoPath project solution which I have built from scratch.It has code behind to get the list of "approver types" and "approvers" from the sharepoint List and populate it to the repeating table in infopath 2007 form

It also has code to submit the form to the sharepoint library and manually start an existing SharePoint Designer OOTB Approval workflow by invoking the "start workflow" method.

When I ran it, it populated the approvers from the list and allowed me to fill in and submit the form but it hit the "COM Component exception error" as stated above.

So I went and did the following checks:
---------------------------------------------------------
1. Check the application pool for this form hosted in SharePoint and ensured that the "Load User Profile" is set to "True" - It is set to true, so I have ruled this out

2. Try setting the build configuration to x84 from any CPU and ensure to reference the correct dll versions for it - Did this, and it still gave me the COM Component issue, so ruled this out

3. Try setting the build configuration to x64 and ensure to reference the correct dll versions for it - Did this, but got "InfoPath cannot load this form" error. So I checked that my form is code signed in VS 2008 and it warns me that the form will not be code signed and published until I select the certificate and hit the publish button under build menu, so I went ahead and did that and it got published.

I then tried to open the infopath form after publishing from SharePoint itself and it gives me the error that the infopath form dll or one of its dependencies were not configured correctly and that is why its not opening it up for me.
I tried opening the manifest.xsf directly from Infopath itself and that too gives me an error saying something to the effect that 'this form is not signed with the certificate and hence is not openable'.

After reverting the setting back to Any CPU, it opened up fine, so ruled these options out too

4. Try changing the application pool's 'Enable 32-bit Applications' to "True" - This caused the sharepoint web services to stop and only when I changed it back to "False' it was able to retrieve my approvers, so ruled this out too

5. Try changing .NET Framework for application pool to a higher version instead of v2.0 this caused the entire form to error out and load its contents into the Error Message window stating that the .NET framework is incompatible. So I reverted that one back to its original v2.0, so ruled this out too

From what I can see of the above, I really cannot change any of the settings in IIS, nor can I change the build configuration to x64 / x86.

I also do not want to unnecessarily create a SharePoint list just to maintain and track approvers for the infopath forms in order to just let the workflow kick-off automatically and read the values from this additional list.

For now I think the only option will be to get hold of the COM Component and register it somehow.
Does anyone know where I can get a hold of this and what is its name or what's it called?

If any of you have any other ideas that might help me, I would be quite grateful for the help

Thanks - Reema