Code

Re: VSTA to use coding for so-you-want-to-send-an-email

ferdbiffle — Wed, 02 Mar 2011 18:17:29 GMT

Were you ever able to get VSTA working with InfoPath 2007? I am experiencing the same problem that you had on both of my development boxes.

I have tried repairing InfoPath (Office 2007), and also tried uninstalling and re-installing .Net Programmability to no avail. I would really like to get this working, but I'm at a dead end...

Re: VSTA to use coding for so-you-want-to-send-an-email

Hilary Stoupa — Thu, 10 Feb 2011 17:03:28 GMT

Have you considered just running a repair of your InfoPath install? Your screenshots show Visual Studio 2010 in one -- are you trying to create a new IP project in VS2010? 'Cause VS2010 doesn't have an IP template. If you want to use Visual Studio, you'll need to use 2008 or 2005. Otherwise, you'll want to use VSTA. It seems like repairing (or reinstalling) IP may be what you need to do.

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Thu, 10 Feb 2011 15:50:19 GMT

http://msdn.microsoft.com/en-us/library/cc176002.aspx I found this link which explains how to register my host (which I assume is infopath) So, when I checked this, it seems host is already registered please see screenshot So, how can this error be resolved

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Thu, 10 Feb 2011 14:51:19 GMT

attaching a clearer screenshot of this error

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Thu, 10 Feb 2011 12:32:46 GMT

The second time after this error appeared, I tried adding code again I received a 3 messages/errors please see screenshot below

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Thu, 10 Feb 2011 11:56:44 GMT

and followed by this transient message

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Thu, 10 Feb 2011 11:54:06 GMT

I am also attaching a series of messages that were shown before that error (above screenshot) appeared.

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Thu, 10 Feb 2011 11:47:17 GMT

I changed the coding method to VB through the form properties and tried again. I got a series of messages and then this error please see attached screeenshot

Re: VSTA to use coding for so-you-want-to-send-an-email

Jimmy — Sun, 30 Jan 2011 10:05:24 GMT

You're getting that most recent error because the code you entered is for the VB.NET 2007 OM, not VBScript. As to the previous error, make sure the code project path in the form properties indicates an actual folder where you have write permissions.

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Sun, 30 Jan 2011 05:22:21 GMT

after filling the above code..I previewed the file..it gives the following error

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Sun, 30 Jan 2011 05:21:01 GMT

I selected VB Script this screen opened up

Re: VSTA to use coding for so-you-want-to-send-an-email

Potemkine — Fri, 28 Jan 2011 21:01:33 GMT

Hi, can you check the programming language:
Go to Tools -> Form Options -> Programming Section

Check the language for programming /select the desired language

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Fri, 28 Jan 2011 18:02:21 GMT

thank you I tried what you said and it seems to go to next step now but now it gives the following error please see screenshot

Re: VSTA to use coding for so-you-want-to-send-an-email

khajoors — Fri, 28 Jan 2011 16:37:50 GMT

I have .NET framework 4..does that work..please see screenshot

Re: VSTA to use coding for so-you-want-to-send-an-email

Potemkine — Fri, 28 Jan 2011 16:25:18 GMT

Hi, can you check that framework 2.0 is installed ? and try to repair your office installation and choose "Run all from my computer " for InfoPath.