General

Re: Repeating Cascading List from a Hierarchical Data

SamDahl — Tue, 01 Aug 2006 04:33:59 GMT

I've been through the tuorial myself a couple of times.
Put it down to experience.

I don't know about field names being reserved for commands.

~Sam

Re: Repeating Cascading List from a Hierarchical Data

mattlight — Mon, 31 Jul 2006 20:24:02 GMT

I can't believe it - you were absolutely right! Thank you

Year instead of year and Make instead of make

I can't believe the tutorial example uses the name of a field called "Year", isn't that reserved for use as a command and not to be used as a field or query name?

Re: Repeating Cascading List from a Hierarchical Data

mattlight — Mon, 31 Jul 2006 13:32:01 GMT

thanks - I will check it out.

Kind Regards,

Marr

Re: Repeating Cascading List from a Hierarchical Data

SamDahl — Mon, 31 Jul 2006 11:08:22 GMT

Yeah, that's what I meant. When you made the boxes that the filter refers to, did you make them with a capital letter at the start?

Basically, your xpath has to match your datasources exactly (capitalisation included).

Forgive me if I'm wrong but it's been a while since I did this and I'm tired >.<

Post back if it still doesn't work.

Good luck

Re: Repeating Cascading List from a Hierarchical Data

mattlight — Mon, 31 Jul 2006 10:58:53 GMT

Hi,

What do you mean by capitalised? I have done the details of the filtering in lower case for all of them.

current()/my:year
current()/my:make

is this what you mean?

Thanks

Matt

Re: Repeating Cascading List from a Hierarchical Data

SamDahl — Mon, 31 Jul 2006 10:27:32 GMT

Are you sure that you have correctly capitalised?

Re: Repeating Cascading List from a Hierarchical Data

mattlight — Sun, 30 Jul 2006 21:07:44 GMT

I don't know but, I just looked through and found a "simular" article. Is it the same problem or not? Thanks

http://www.infopathdev.com/forums/topic.asp?TOPIC_ID=1606

DrValium... here's an update that should get you rolling:

The solution required two things:

1) current() represented the NODE d:Registering, and not the ATTRIBUTE @Arbetsuppgift, therefore the correct filter is expressed as "../@Element = current()/@Element"

2) Once you update the filter, the Value and Display Name fields of the drop-down list get reset to ".", which if not updated back to @Value and @id respectively, leaves the list looking blank.

With both of these adjustments in place, the repeating cascading lists work as expected.

Greg Collins [InfoPath MVP]
InfoPath Dev

Repeating Cascading List from a Hierarchical Data

mattlight — Sun, 30 Jul 2006 20:35:28 GMT

Hi guys,

I hope you're all well - I am new to this forum and relatively new to InfoPath so I understand that a lot of my questions may be very basic.

However, I have been really interested in InfoPath for a number of reasons - my favourite so far is because it seems to be quite east to interface between an SQL database and a form in the form of Repeating Cascading List from a Hierarchical Data Source.

I read and followed the instructions from a link which ishttp://www.infopathdev.com/howto/tutorials/default.aspx?i=9f6fda3a14c14ac4924cf0a382928432

which I thought was great except the model didn't work if I had a filter on there.

Has anyone else had this problem or is it just me? I have tried over and over again but it just won't work.

If I turn the filter off, it shows all the model info - so that data it is trying to display is definately coming through, no problem.

If I create one filter based on the year value = current()/my:year then it displays nothing. If I then include the AND make value = current()/my:make then it still displays nothing

The Make one works perfectly - what is it that I am doing wrong?

I am hoping to have a few more than 3 Hierarchical drop downs for an order form based upon a load of products - category, brand, type, flavour, size, promotion, wholesaler, product code - so I hope that at this early development stage I can get over the first hurdle.

Thank you for your help