Browser Forms

Re: Some rules were not applied error

Qazi Anis — Sun, 23 Aug 2009 05:56:44 GMT

Gordon

i assume cancel button is ur custom button. Why dont you just disable or hide it using conditional formatting while submitting and enable it later after finishing submitting

Re: Some rules were not applied error

Qazi Anis — Sun, 23 Aug 2009 05:51:53 GMT

jonelle

please check the mail settings on the server. if it is browser enabled form it takes the credentials of the server to send the mail. verify if the serer credentials can send the mail

Re: Some rules were not applied error

ncgordon — Mon, 20 Apr 2009 18:51:05 GMT

Hi: I am having the same problem. My form has three different views depending upon which data connection is being used and what stage in the work flow the form is at. I use custom Rules for each stage that determine the visibility and condition of many different elements on the form rather than Infopath 'Views'. The three custom views are as follows:

one for a NEW form,
a second -- SENT -- after the form has been submitted to the first data connection,
and a third -- COMPLETED -- when the form is returned via the second data connection.

I've tried to catch all the validation errors before invoking the "submit" rule. Then, just prior to invoking "submit", I change the text of the invisible "Status" field from "New" to "Sent." So far so good. The view won't change if any of my custom validation rules throws an error, allowing the user to fix any errors in the "New" view, and then re-submit the form.

HOWEVER, I haven't been able to figure out how to catch any generic errors during the "Submit process", such as the error that is generated if the user hits "Cancel". By that point, the Submit field has already changed to "Sent" and the view of the form is irrevocably changed.

I cannot use roles, because the recipient's of the first stage are outside our server domain. I tried to include a button to revert to the former view (New), but that button should be disabled and invisible to the recipients of the "Sent" view, which I can't do if I can't catch the generic validation error. Catch 22.

Can anybody help?

N.C. Gordon.

Re: Some rules were not applied error

jonelle — Fri, 08 Aug 2008 17:38:16 GMT

ok so it working for a day or so and now i'm gettint the "some rules were not applied error message again" What I've noticed is that the form is submitting successsfully to the two sharepoint lists but when it attempts to send the user an email it fails and gives me the "some rules were not applied message" I'm totally lost at this point. I've checked all my data connections and rules and they look fine.

Re: Some rules were not applied error

Hilary Stoupa — Thu, 07 Aug 2008 15:51:53 GMT

One more note -- I would think that if you set a rule on a button that was using Rules and Custom Code, and your rule action was to submit a form using a submit connection, and you get the "rules not applied / cannot submit" error -- you may want to look at that submit connection. It could be something wasn't set up correctly for it.

Re: Some rules were not applied error

Hilary Stoupa — Thu, 07 Aug 2008 15:36:24 GMT

I'm not sure -- I wouldn't think so -- I would think that would be handled by conditions -- you set your conditions to create the scenarios where each rule will run. By "it still didn't work" what do you mean? You had the same error that not all rules were applied? Did you look on the warning to see if there is button you can click that will give you the details as to why the rules were not applied? When I intentionally cause rules not to run on a form I use, the warning box has a button that says "Show Details". If you click that button you will get some better information on what is happening.

Edit: Sorry, I realized that you did post the details above -- the form can't be submitted.

Re: Some rules were not applied error

jonelle — Thu, 07 Aug 2008 15:14:23 GMT

Ok I tried using the Rules and Custom Code for the buttons action and set a rule of submitting the form for each button and it still didn't work. So I removed the second button and used on submit button that had different rules and submit actions set up based on a fields value in the form. It worked the first time I tried it, sending the form to two different locations, however when I tried it a second time I received the some rules were not applied error.

If you have multiple rules set up on a submit button, do all rules have to be true everytime the form is submitted?

Re: Some rules were not applied error

Hilary Stoupa — Thu, 07 Aug 2008 14:07:20 GMT

If I recall correctly, there is a button on the error message pop up you can click that will open an area below it with more details on the error -- that may help you track your problem.

If both buttons are set to use "Submit" any change to the form's Submit Options will affect both buttons. You may need to use Rules and Custom Code for the button's action, then set a rule that has the action of submitting the form and select the correct submit action for each button.

Re: Some rules were not applied error

jonelle — Thu, 07 Aug 2008 13:41:17 GMT

The details on the message say:

InfoPath cannot submit the form.
Some rules were not applied.
InfoPath cannot submit the form.

I also noticed that when i change the button properties on one of the submit buttons, it changes it on the other one as well.

Re: Some rules were not applied error

Hilary Stoupa — Thu, 07 Aug 2008 01:48:45 GMT

What do the details say on the error message on the rules?

Some rules were not applied error

jonelle — Wed, 06 Aug 2008 19:30:59 GMT

I have a form that has two submit buttons using two different data connections. The first button works fine and the form is sent to a sharepoint list. Once the form is opened from the sharepoint list there is a second button that is suppose to send an email reply, based on a field in the form, to the original sender of the form and also send the form to another sharepoint list. whenever we try to use the second submit button we recieve a "some rules were not applied error". Help please

Re: Rule on submit button does not execute if there are errors

miowmix2 — Thu, 31 Jul 2008 22:31:41 GMT

Thanks for the tip, Hilary - I set up a regular button with the same rules and it worked perfectly.

The only downside is that it brings up an alert box with 'some rules were not applied' which isn't as nice as the default 'cannot be submitted' error, but I will have a fumble with the settings and see if I can change that behaviour.

YAYA!

Miowmix2

Re: Rule on submit button does not execute if there are errors

Hilary Stoupa — Thu, 31 Jul 2008 22:13:46 GMT

Hi --

I don't think you are doing anything wrong -- when I first saw your post I put together a quick demo and had exactly the same results. It seems that the validation errors prevent any rules in the submit from being run.

I wonder if you used a regular button and added rules to it (so that the button's action was Rules and Custom Code instead of Submit) and had your rules in the same order, if you would have the same issue? Of course, that means you wouldn't want to show the Submit menu item or tool bar -- you'd want to limit users to the button on your form. It may be worth a try!

Re: Rule on submit button does not execute if there are errors

miowmix2 — Thu, 31 Jul 2008 22:04:41 GMT

Hi,

On the submit options dialog I have 'allow users to submit this form' and 'perform custom action rules' selected.

Then in the rules dialog, I have my rule to set the form-field value above my rule to submit the form.

This rule to set the value of the form-field is 'set a field's value: formSubmitted = "yis"
Condition: None - This rule always applies

When I submit my form without filling in all the fields it shows the default 'cannot submit because it contains validation errors' message - this is fine...

But the value of formSubmitted is not updated...

Hopefully these pictures will indicate something really simple that I'm doing wrong!

Thanks

Miowmix2

Re: Rule on submit button does not execute if there are errors

Anuma — Thu, 31 Jul 2008 05:30:22 GMT

What is your first rule and are you getting any error while executing first rule?